Showing posts with label Flow Painting. Show all posts
Showing posts with label Flow Painting. Show all posts

Tuesday, April 2, 2019

Pour Painted Rock Rings

I've been obsessed with polished rocks my entire life.  On every vacation my dad would let me grab a few at the local trading post for my collection and to this day I still buy them when I'm in a fun mountain town like Big Bear here in Cali.  If you're too impatient to make your own in a rock tumbler or you're too far from a trading post, you can always pour paint your own and then coat them with resin.  The effects are amazing and they make beautiful jewelry, too.  Rock out & rock on, my crafty friends, and don't forget to Make Your Mark!
Rock out with these glossy rock rings!
Mix in metallics to make them marvelous!
 These look like huge turquoise stones
Rock and roll!
STUFF I USED
Americana Acrylics
River Rocks
Ring Blanks
Glaze Coat Epoxy Resin
DecoArt Pouring Medium
E6000 Plus
Watch how to make them here!
 Truth be told, I've been wearing these around the house, but they
look much better on Julie!
Pebble perfect!

Tuesday, August 15, 2017

Thrift Store Table Makeover

Have you noticed how much hotel furniture is showing up at thrift stores these days?  This glass table was a bit scratched up, but it was only $15 so I snapped it up and decided to give it a makeover worthy of Kelly Wearstler (my favorite interior designer).  This paint technique is a mix between Italian marbled paper and flow painting and I have a feeling the next table I attempt will be even better than this one.   In the mean time, I'm in LOVE!  Remember to scour thrift stores, recycle as much as you can and always Make Your Mark!
 Rhapsody in blue
I love the bold splashes of color with the intricate marbling around the edges 

Watch how I made it here!
STUFF I USED
Thrift store coffee table
*I used Smoke Grey, Dark Denim, Steel Blue, Seaside Blue & Grey Taupe
Water
Plastic cups
Toothpicks
HERE'S HOW
1. - 3.  Fill each cup with paint, add 10% water and stir
*I used 5 matching colors for this project and I propped the glass table top on wood pieces so that it would be about 1 1/2" above the table
4.  Paint the edges with one of the colors
5. - 7.  Pour each color in a swirl pattern on the table working from the center outward
8.  Carefully angle the table to allow the paint to mix and blend together
9.  Drag a toothpick back and forth every 1" across the table to create a marbled paper look
10.  Paint the table base in Americana Decor Metallics in Silver and let dry
11.  Mix the Glaze Coat according to directions, pout on the table and spread with a sponge brush
12.  Use a small torch or long arm lighter to pop the bubbles, cover and let dry
Assemble and you're done!
So chic!

Tuesday, June 20, 2017

Flow Painted Dresser Ikea Hack

There is nothing more fun than dripping tons of paint on a canvas and watching it flow together.....NOTHING!  Lately I've been seeing tons of "dirty pour" paintings and flow paintings and thought it might be fun to incorporate the technique into a furniture piece.  So, that's just what I did.  I grabbed a RAST dresser at Ikea and went nutty bananas.  Because I wasn't exactly sure how I wanted to paint the drawer fronts, I had 1/4" plywood cut to about the same size so I could experiment.  If you're more confident than I am, I say go for it on the drawer fronts and skip that part! Just FYI, it's much easier to flow paint a thin piece of plywood IF the dresser you're making over is already assembled.  Remember to get messy, use tons of color and always Make Your Mark!


Getting messy!

Watch how fun it is to make here!
STUFF I USED
1/4" plywood cut to the size of the drawer fronts
Small cups and spoons
Drill
HERE'S HOW
1.  Pour your colors into small cups and add about 10% water to each color and stir
2. & 3.   In 2 colors, spray a shot of silicone lubricant into the paint and stir
*This will cause a chemical reaction with the other paints and give some terrific "cell" effects
4.  Paint the edges of your plywood in a solid color
5.  Drip the paints on the plywood
6.  Move the plywood in all directions so that the paints blends together and covers the entire surface of the plywood
7.  Drip some other colors on your piece if you feel like there is a blank spot
*Let everything dry for as long as it takes
8.  I painted the edges of the drawer fronts black so that each plywood piece would look like it was framed
9.  Paint the rest of the dresser
10.  Glue the dry painted pieces to the drawer fronts with E-6000 Glue
11.  Assemble the drawers and extend the original drilled holes through the painted plywood so that you can add the hardware
12.  Screw in the knobs and put in the drawers!
Go with the flow!